Warm Tiles is simple to install. Any skilled Do-It-Yourselfer with adequate knowledge of flooring and electrical wiring can install your own floor warming system. Just read the comprehensive installation instructions found in your floor warming kit and follow the steps.
All installations must be in accordance with all applicable national and local electrical and building codes, regulations and inspection procedures. Electrical inspection may be required during and/or after system installation. Check with your local electrical inspection department before beginning installation. When installing your tile or stone, follow standard tiling procedures of the Tile Council of America for the United States or by the Terrazzo, Tile and marble Association of Canada.
Whether you’d like to enjoy radiant floor warming in your kitchen, bathroom, family room or anywhere else, you should always plan your installation ahead of time. You can download the Warm Tiles Room Layout Planner by clicking here!
Always remember these four simple steps.
1. On the room’s subfloor, whether it is plywood, concrete or cement backerboard, layout your Warm Tiles system according to the instructions. Be sure to place the sensor of your thermostat between the heating cables during laying the floor. Use a Warm Tiles Thermostat for automatic control of your floor warming system.
2. Spread thin-set mortar as directed in the instructions over the Warm Tiles system or pour self-leveling cement. Let dry.
3. Install the floor finish according to manufacturer directions.
4. Make electrical connections as outlined in your installation instructions included in your floor warming kit. Follow the Thermostat programming instructions included with your thermostat Kit
Complete simple-to-follow installation instructions come with each Warm Tiles Floor Warming Kit. Call Technical Service at (800) 523-7636 with any questions you may have at any time during the installation process.
CAUTION: Kit combinations that exceed 10 Amps should be connected by a qualified electrician.
Downloadable files on this page are available in ADOBE Acrobat PDF File format. If you do not have ACROBAT click here to download the latest version of ACROBAT.
Consumer Brochure
| Warm Tiles Consumer Brochure - English | |
 |
|
| Warm Tiles Consumer Brochure - French | |
 |
|
| Warm Tiles Consumer Brochure - Spanish | |
 |
|
Cable Install
| Warm Tiles Cable Installation Instructions- English | |
 |
|
| Warm Tiles Cable Installation Instructions- French | |
 |
|
| Warm Tiles Cable Installation Instructions - Spanish | |
 |
|
Cable Guide
| Warm Tiles Cable Guide - English, Spanish & French | |
 |
|
Mat Install
| Warm Tiles Mat Installation Instructions - English | |
 |
|
| Warm Tiles Mat Installation Instructions - French | |
|
|
| Warm Tiles Mat Installation Instructions - Spanish | |
|
|
Thermostats Install
| Warm Tiles FTS-1 & FTS-2 Thermostat Installation Instructions - English, French & Spanish | |
 |
|
Warranties
| Warm Tiles 15 Year Limited Warranty | |
 |
|
| Good Housekeeping Consumer Protection Warranty | |
 |
|
Sell Sheet
| Programmable and Manual Thermostats | |
 |
|
| RK Relay Kits | |
 |
|
| Detecto™ Electric Fault Indicator | |
 |
|
| Self-Adhesive Mat System | |
 |
|
| DFT Cable Kits | |
 |
|
Instructions
| RK-1 120 VAC Instructions | |
 |
|
| RK-2 240 VAC Instructions | |
 |
|
| Electric Fault Indicator Instructions | |
 |
|